
Solar Ground Mount
Single Ramming Pile
Fixed-tilt ground structures on PHC piles, ramming piles, concrete and ground screws.
CG201 Single ramming pile solution
ADVANTAGES OF PUNCHING PILE:
Simple and fast installation Instead of preparing cement base in advance the vertical shaft is punched into the ground (pile driving depth: 1500-2000mm) by a pile driver which greatly saves the installation time and cost.
Strong adaptability to installation site Punching pile has lower requests for surface flatness than traditional cement foundation and its installation is not affected by the seasons.
Environmental friendly Without performing and preparation works the surrounding areas remain unspoiled. Besides without corruption and zero disposal costs the pile is totally recyclable complying with the environmental protection concept.
Easy and quick relocation Punching pile is easy to remove so that the installation site can be reused.
In this solution the back support is the punching pile which is about 3m long. We also have independent punching piles such as punching pile with flange plate and punching pile without flange plate. For more information about them pls look at the document named Double Punching Pile Solution.









| Installation site | open area, lake and wetland |
|---|---|
| Installation angle | from 5°to 40°,according to customer’s feasibility study |
| Module | poly/mono/thin film |
| Material | HDG Steel/POSMAC Q235B&Al6063-T5 |
| Wind load | up to 57m/s |
| Snow load | 0.5KN/M² |
| Foundation | Ramming pile |
| Anti-corrosive | HDG/VCI/SEBF |



If you are interested in our products, please feel free to send an e-mail to info@cmsolarcn.com
Or call us: +86 512 5893 9921 · WhatsApp +86 159 0616 4069
Inquire now







WeChat +86 159 0616 4059