FAQ – Cm solar

Need help? FAQs

End clamps and mid clamps, Easy-to-install, height-adjustable module clamps with a clamping area of 30–50 mm.

Suitable for all standard roofing types (roof tiles, plain tiles)
Laterally and height-adjustable roof hooks allow an absolutely flat module installation
Installation is possible from a rafter width of just 36 mm
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis as well as the rail and attachment diagram

Installation without roof penetration
Aerodynamic system with low ballast
Optimised wind suction openings for reduced ballast
Problem-free water drainage and optimal module back-ventilation
Also suitable for roof-edge zones
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis and the ballast plan

Fast and direct attachment of the rails with sheet-metal screws on the raised seams
Low material and assembly costs
Available in 125, 295 and 4600 mm length
24 mm height provide optimised rear ventilation, simplify cable routing and enable installation even on slightly corrugated roof coverings
HSS HK 125 complete is supplied with 2 holes (5 mm / 6.5 mm) and sealing tape pre-assembled
Made of weather-resistant aluminium
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components

Fast and direct attachment of the rails with rivets or sheet-metal screws on raised seams
Low material and assembly costs
Rail heights of 50 or 100 mm guarantee a sufficient distance from the roof covering for optimal rear ventilation and use in regions with high temperatures
Floating installation with brackets reduces the number of expansion joints and enables the best possible use of the roof area
HSS HK 125 XL 50/100 complete are supplied pre-assembled with sealing tape as standard, the mounting brackets are pre-drilled
Made of weather-resistant aluminium
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components

Fast and direct attachment of the rails with rivets or sheet-metal screws on the raised seams
Horizontal module orientation, variable size of module array
Economically optimised system thanks to low material, logistics and installation costs
ST-AK 1/12 complete / l=180 mm is delivered pre-assembled with 2 holes each (5 mm / 6.5 mm / 8.5 mm) and sealing tape as standard
Made of weather-resistant aluminium
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components

Fast and direct attachment of the rails with rivets or sheet-metal screws on the raised seams
Vertical module orientation, variable size of module array
Economically optimised system thanks to low material, logistics and installation costs
High rigidity of the rail makes it suitable for high loads
Trapezoidal sheet metal rail AK complete / l=395 mm is delivered pre-assembled with 24 holes each and sealing tape as standard
Made of weather-resistant aluminium
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components

Fast and direct attachment of the rail with rivets or sheet-metal screws on the raised seams
Additional pitch of the solar modules up to 5° (vertical) and 7° (horizontal) is possible
Trapezoidal sheet metal rail LIFT is delivered pre-assembled with 24 holes and sealing tape as standard
Made of weather-resistant aluminium
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components

Fast and direct attachment of the rail with rivets or sheet-metal screws on the raised seams
Precise, tension-free and variable installation on roofing sheets and barrel roofs (curved trapezoidal sheet metal roofing) by means of movable adapters
Trapezoidal sheet metal rail VARIO is delivered pre-assembled with 24 holes and sealing tape as standard
Made of weather-resistant aluminium
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components

Fast and direct attachment of the brackets with rivets or sheet-metal screws on the raised beads
The height adjustment of the mounting system allows absolutely flat and tension-free installation (including with frameless modules)
Crossbar-adapter connection is possible – this is particularly suitable for precise and tension-free installation of frameless modules
Made of weather-resistant aluminium, pre-assembled with sealing tape
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components

Elevated installation with tilt angles from 5° to 45° (in 5° steps) possible
Position and size of the module array is variable and freely selectable
Orientation towards the eaves or the verge is possible
Also ideal for small systems from 1 module
Low transport and storage costs due to delivery of collapsed triangles
We will gladly create the structural design for our customer’s projects if required – the documentation we provide includes the structural analysis as well as the installation plan for all components